Which Jewelry Metals Tarnish? Why and How Is It Restored?

Jewelry is a timeless accessory that adds elegance and personality to any outfit. However, over time, many jewelry metals can tarnish, losing their shine and luster. Understanding which metals tarnish, why it happens, and how to restore them can help you keep your jewelry looking as good as new. This article will explore the metals prone to tarnishing, the science behind tarnishing, and practical tips for restoration and prevention.

What Is Tarnish?

Tarnish is a thin layer of corrosion that forms on the surface of metals due to a chemical reaction with substances in the environment, such as oxygen, sulfur, or moisture. Unlike rust, which eats away at metal, tarnish is usually a surface-level issue that can often be reversed with proper care.

Which Jewelry Metals Tarnish?

Not all metals tarnish equally. Here’s a breakdown of common jewelry metals and their susceptibility to tarnish:

Silver (Sterling Silver)

Why It Tarnishes: Silver reacts with sulfur compounds in the air, forming silver sulfide, which appears as a black or gray layer on the surface.
Tarnish Rate: High. Sterling silver (92.5% silver and 7.5% copper) tarnishes more quickly than pure silver ( 99.9% silver and 0.1% other metals) due to its copper content.

Copper

Why It Tarnishes: Copper reacts with oxygen and moisture, forming copper oxide (a greenish patina) or copper carbonate (a bluish-green layer).
Tarnish Rate: High. Copper jewelry is prone to rapid tarnishing.

Brass

Why It Tarnishes: Brass, an alloy of copper and zinc, tarnishes when exposed to air and moisture, forming a dull layer of copper oxide or zinc oxide.
Tarnish Rate: Moderate to high.

Gold (Lower Karats)

Why It Tarnishes: Gold is usually categorized into different karats depending on the amount of pure gold it contains. Pure gold (24K) does not tarnish, but lower-karat gold (e.g., 14K or 18K) contains other metals like copper or silver, which can tarnish over time.
Tarnish Rate: Low to moderate, depending on the alloy composition. Other metals in the alloy affect the rate of tarnishing. For example, rose gold tarnishes more often and at a faster rate than white gold. This is because rose gold has a higher copper content in the alloy, which makes it more susceptible to reactions such as oxidation. In addition, white gold is usually plated with a layer of rhodium, which is highly resistant to corrosion and oxidation, so rhodium-plated white gold is much less likely to lose its luster.

Expansion: The alloy in white gold is usually silver, zinc, nickel, palladium; the alloy in rose gold is usually silver, zinc, nickel, copper; and the alloy in yellow gold is usually silver, zinc, nickel.

Platinum

Why It Tarnishes: Platinum is highly resistant to tarnish but can develop a dull patina over time due to scratches or exposure to certain chemicals.
Tarnish Rate: Very low.

Stainless Steel

Why It Tarnishes: Stainless steel is highly resistant to tarnish due to its chromium content, which forms a protective oxide layer.
Tarnish Rate: Very low.

Why Do Metals Tarnish?

Tarnishing occurs due to chemical reactions between the metal and environmental factors:

Oxygen: Causes oxidation, leading to tarnish.
Sulfur: Reacts with metals like silver to form sulfide compounds.
Moisture: Accelerates the tarnishing process, especially in humid environments.
Acids and Chemicals: Contact with sweat, perfumes, or cleaning products can speed up tarnishing.

How to Restore Tarnished Jewelry?

Restoring tarnished jewelry depends on the type of metal and the severity of the tarnish. Here are some effective methods for different metal jewelry:

(Note!!! If there are other decorations (e.g., gemstones) set into the metal, please check that the cleaning agent you are using will not affect them before cleaning to avoid irreversible damage.)

Silver Jewelry

Baking Soda and Aluminum Foil Method:
1. Line a bowl with aluminum foil.
2. Add 1 tablespoon of baking soda and 1 cup of hot water.
3. Place the silver jewelry in the solution for 5–10 minutes.
4. Rinse and polish with a soft cloth.
Commercial Silver Polish: Use a specialized silver polish for stubborn tarnish.

Copper and Brass Jewelry

Lemon and Salt Method:
1. Cut a lemon in half and sprinkle salt on the cut side.
2. Rub the lemon over the tarnished areas.
3. Rinse and dry thoroughly.
Vinegar and Salt Solution:
1. Mix 1 tablespoon of salt and 1 cup of white vinegar.
2. Soak the jewelry for 15–20 minutes, then rinse and dry.

Gold (Lower Karats) Jewelry

Mild Soap and Water:
1. Mix a few drops of mild dish soap with warm water.
2. Gently scrub the jewelry with a soft toothbrush.
3. Rinse and dry with a lint-free cloth.
Ammonia Solution (for stubborn tarnish):
1. Mix 1 part ammonia with 6 parts water.
2. Soak the jewelry for 1 minute, then rinse and dry.

If your rhodium-plated white gold jewelry starts to tarnish, take it to a professional jeweler for re-plating.

Platinum Jewelry

Jewelry Cleaning Solution: Use a platinum-specific cleaner or a mild soap and water solution.
Professional Polishing: For deep scratches or dullness, take your platinum jewelry to a professional jeweler.

How to Prevent Jewelry Tarnish?

Prevention is key to keeping your jewelry looking its best. Here are some tips:

Store Properly: Keep jewelry in airtight containers or anti-tarnish bags. (Silicone packets can be used in storage boxes to absorb excess moisture.)
Avoid Exposure: Remove jewelry before swimming, showering, or applying perfumes and lotions.
Clean Regularly: Wipe jewelry with a soft cloth after each use to remove oils and dirt.
Use Anti-Tarnish Strips: Place these strips in your jewelry box to absorb tarnish-causing gases.

Common Myths About Jewelry Tarnish

“Tarnish Means the Jewelry Is Fake”: Not true! Even genuine metals like silver and brass tarnish over time.
“Gold Never Tarnishes”: While pure gold (24K gold) doesn’t tarnish, lower-karat gold can due to its alloyed metals.
“Tarnish Is Permanent”: Most tarnish can be removed with proper cleaning techniques.

FAQs About Tarnished Jewelry

Can I wear tarnished jewelry?

Yes, tarnished jewelry is safe to wear, but it may not look its best. Clean it regularly to maintain its appearance.

How often should I clean my jewelry to prevent tarnish?

Clean your jewelry every few weeks if you wear it frequently. For stored jewelry, check and clean it every few months.

Can tarnish harm my skin?

Tarnish itself is not harmful, but some people may experience skin irritation from certain metals or cleaning residues. Always rinse jewelry thoroughly after cleaning.

Why does my jewelry tarnish so quickly?

Frequent exposure to sweat, humidity, or chemicals (e.g., perfumes, lotions) can accelerate tarnishing. Proper storage and care can slow this process.

Which is less likely to tarnish, rose gold, white gold or yellow gold jewelry?

For the same karat, white gold is less likely to tarnish, followed by yellow gold, with rose gold being the most likely to tarnish. This is because rose gold contains more copper, which is more prone to oxidation and tarnishing.

Does rhodium-plated jewelry tarnish?

Many white gold and silver jewelry pieces are plated with rhodium, a highly reflective and tarnish resistant metal. Over time, this coating can wear off, exposing the base metal to tarnish.

Does gold-plated jewelry tarnish?

If the gold you choose to have plated is 24K gold, it will not tarnish if the plating is intact, but it may tarnish if the plating wears off and exposes the base metal (depending on the base metal). If you choose a lower karat gold plating, it will gradually tarnish over time.

What kind of gold jewelry will not tarnish?

Currently, only pure gold jewelry (i.e. 24k gold) does not tarnish.

Final Thoughts

Tarnishing is a natural process that affects many jewelry metals, but it doesn’t have to ruin your favorite pieces. By understanding which metals are prone to tarnish, why it happens, and how to restore and prevent it, you can keep your jewelry looking radiant for years to come.

Moss Agate